# Python framework tests The python test framework is built on top of the ChipDeviceCtrl.py python controller API and the Mobly test framework. Python tests are interaction tests, and can be used for certification testing, and / or integration testing in the CI. Python tests located in src/python_testing ## Resources for getting started - [src/python_testing/hello_test.py](https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/hello_test.py) - sample test showing test setup and test harness integration - [https://github.com/google/mobly/blob/master/docs/tutorial.md](https://github.com/google/mobly/blob/master/docs/tutorial.md) - [ChipDeviceCtrl.py](https://github.com/project-chip/connectedhomeip/blob/master/src/controller/python/matter/ChipDeviceCtrl.py) - Controller implementation - [API documentation](../../../testing/ChipDeviceCtrlAPI.md) - [scripts/tests/run_python_test.py](https://github.com/project-chip/connectedhomeip/blob/master/scripts/tests/run_python_test.py) to easily set up app and script for testing - used in CI ## Writing Python tests - Defining arguments in the test script - In order to streamline the configuration and execution of tests, it is essential to define arguments at the top of the test script. This section should include various parameters and their respective values, which will guide the test runner on how to execute the tests. - All test classes inherit from `MatterBaseTest` in [matter_testing.py](https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/matter_testing_infrastructure/matter/testing/matter_testing.py) - Support for commissioning using the python controller - Default controller (`self.default_controller`) of type `ChipDeviceCtrl` - `MatterBaseTest` inherits from the Mobly BaseTestClass - Test method(s) (start with test\_) and are all run automatically - To run in the test harness, the test method name must be `test_TC_PICSCODE_#_#` - More information about integration with the test harness can be found in [Test Harness helpers](#test-harness-helpers) section - Any tests that use async method (read / write / commands) should be decorated with the @async_test_body decorator - Use `ChipDeviceCtrl` to interact with the DUT - Controller API is in `ChipDeviceCtrl.py` (see API doc in file) - Some support methods in `matter_testing.py` - Use Mobly assertions for failing tests - `self.step()` along with a `steps_*` method to mark test plan steps for cert tests ### A simple test ```python # See https://github.com/project-chip/connectedhomeip/blob/master/docs/testing/python.md#defining-the-ci-test-arguments # for details about the block below. # # === BEGIN CI TEST ARGUMENTS === # test-runner-runs: # run1: # app: ${ALL_CLUSTERS_APP} # app-args: --discriminator 1234 --KVS kvs1 --trace-to json:${TRACE_APP}.json # script-args: > # --storage-path admin_storage.json # --commissioning-method on-network # --discriminator 1234 # --passcode 20202021 # --trace-to json:${TRACE_TEST_JSON}.json # --trace-to perfetto:${TRACE_TEST_PERFETTO}.perfetto # factory-reset: true # quiet: true # === END CI TEST ARGUMENTS === class TC_MYTEST_1_1(MatterBaseTest): @async_test_body async def test_TC_MYTEST_1_1(self): vendor_name = await self.read_single_attribute_check_success( dev_ctrl=self.default_controller, # defaults to self.default_controller node_id = self.dut_node_id, # defaults to self.dut_node_id cluster=Clusters.BasicInformation, attribute=Clusters.BasicInformation.Attributes.VendorName, endpoint = 0, # defaults to 0 ) asserts.assert_equal(vendor_name, "Test vendor name", "Unexpected vendor name") if __name__ == "__main__": default_matter_test_main() ``` --- In this test, `asserts.assert_equal` is used to fail the test on equality assertion failure (throws an exception). Because the test requires the use of the async method `read_single_attribute_check_success`, the test is decorated with the `@async_test_body` decorator The `default_matter_test_main()` function is used to run the test on the command line. These two lines should appear verbatim at the bottom of every python test file. The structured comments above the class definition are used to set up the CI for the tests. Please see [Running tests in CI](#running-tests-in-ci). ## Cluster Codegen - [Objects.py](https://github.com/project-chip/connectedhomeip/blob/master/src/controller/python/matter/clusters/Objects.py) for codegen, - [ClusterObjects.py](https://github.com/project-chip/connectedhomeip/blob/master/src/controller/python/matter/clusters/ClusterObjects.py) for classes Common import used in test files: `import matter.clusters as Clusters` Each cluster is defined in the `Clusters.` namespace and contains always: - id - descriptor Each `Clusters.` will include the appropriate sub-classes (if defined for the cluster): - `Enums` - `Bitmaps` - `Structs` - `Attributes` - `Commands` - `Events` ### Attributes Attributes derive from ClusterAttributeDescriptor Each `Clusters..Attributes.` class has: - cluster_id - attribute_id - attribute_type - value Example: - class - `Clusters.OnOff.Attributes.OnTime` - Used for Read commands - instance - `Clusters.OnOff.Attributes.OnTime(5)` - Sets the value to `5` - Pass the instance to Write method to write the value ### Commands Commands derive from `ClusterCommand`. Each `Clusters..Commands.` class has: - `cluster_id` - `command_id` - `is_client` - `response_type` (None for status response) - `descriptor` - data members (if required) Example: - `Clusters.OnOff.Commands.OnWithTimedOff(onOffControl=0, onTime=5, offWaitTime=8)` - `Clusters.OnOff.Commands.OnWithTimedOff()` - Command with no fields ### Events Events derive from `ClusterEvent`. Each `Clusters..Events.` class has: - `cluster_id` - `event_id` - `descriptor` - Other data members if required Example: - Clusters.AccessControl.Events.AccessControlEntryChanged.adminNodeID ### Enums Enums derive from `MatterIntEnum`. Each `Clusters..Enum.` has - `k` constants - `kUnknownEnumValue` (used for testing, do not transmit) Example: - `Clusters.AccessControl.Enums.AccessControlEntryPrivilegeEnum.kAdminister` ### Bitmaps Bitmaps derive from IntFlag Each `Clusters..Bitmaps.` has: - k Special class: - class `Feature(IntFlag)` - contains the feature map bitmaps Example: - `Clusters.LaundryWasherControls.Bitmaps.Feature.kSpin` ### Structs Structs derive from `ClusterObject`. Each `Clusters..Structs.` has: - A "descriptor" - Data members Example: ```python Clusters.BasicInformation.Structs.ProductAppearanceStruct( finish=Clusters.BasicInformation.Enums.ProductFinishEnum.kFabric, primaryColor=Clusters.BasicInformation.Enums.ColorEnum.kBlack) ``` ## Accessing Clusters and Cluster Elements by ID [ClusterObjects.py](https://github.com/project-chip/connectedhomeip/blob/master/src/controller/python/matter/clusters/ClusterObjects.py) has a set of objects that map ID to the code generated object. `matter.clusters.ClusterObjects.ALL_CLUSTERS` - `dict[int, Cluster]` - maps cluster ID to Cluster class - `cluster = matter.clusters.ClusterObjects.ALL_CLUSTERS[cluster_id]` `matter.clusters.ClusterObjects.ALL_ATTRIBUTES` - `dict[int, dict[int, ClusterAttributeDescriptor]]` - maps cluster ID to a dict of attribute ID to attribute class - `attr = matter.clusters.ClusterObjects.ALL_ATTRIBUTES[cluster_id][attribute_id]` `matter.clusters.ClusterObjects.ALL_ACCEPTED_COMMANDS/ALL_GENERATED_COMMANDS` - dict[int, dict[int, ClusterCommand]] - cmd = matter.clusters.ClusterObjects.ALL_ACCEPTED_COMMANDS[cluster_id][cmd_id] ## ChipDeviceCtrl API The `ChipDeviceCtrl` API is implemented in [ChipDeviceCtrl.py](https://github.com/project-chip/connectedhomeip/blob/master/src/controller/python/matter/ChipDeviceCtrl.py). The `ChipDeviceCtrl` implements a python-based controller that can be used to commission and control devices. The API is documented here in the [ChipDeviceCtrl API documentation](../../../testing/ChipDeviceCtrlAPI.md) The API doc gives full descriptions of the APIs being used. The most commonly used methods are linked below. ### [Read](../../../testing/ChipDeviceCtrlAPI.md#read) - Read both attributes and events - Can handle wildcard or concrete path ### [ReadAttribute](../../../testing/ChipDeviceCtrlAPI.md#readattribute) - Convenience wrapper for Read for attributes Examples: Wildcard read (all clusters, all endpoints): `await dev_ctrl.ReadAttribute(node_id, [()])` Wildcard read (single endpoint 0) `await dev_ctrl.ReadAttribute(node_id, [(0)])` Wildcard read (single cluster from single endpoint 0) `await dev_ctrl.ReadAttribute(node_id, [(1, Clusters.OnOff)])` Single attribute `await dev_ctrl.ReadAttribute(node_id, [(1, Clusters.OnOff.Attributes.OnTime)])` Multi-path `await dev_ctrl.ReadAttribute(node_id, [(1, Clusters.OnOff.Attributes.OnTime),(1, Clusters.OnOff.Attributes.OnOff)])` ### [ReadEvent](../../../testing/ChipDeviceCtrlAPI.md#readevent) - Convenience wrapper for `Read` - Similar to `ReadAttribute`, but the tuple includes urgency as the last argument Example: ```python urgent = 1 await dev_ctrl ReadEvent(node_id, [(1, Clusters.TimeSynchronization.Events.MissingTrustedTimeSource, urgent)]) ``` ### Subscriptions Subscriptions are handled in the `Read` / `ReadAttribute` / `ReadEvent` APIs. To initiate a subscription, set the `reportInterval` tuple argument to set the floor and ceiling. The `keepSubscriptions` and `autoResubscribe` arguments also apply to subscriptions. Subscription return `ClusterAttribute.SubscriptionTransaction`. This can be used to set callbacks. The object is returned after the priming data read is complete, and the values there are used to populate the cache. The attribute callbacks are called on update. - `SetAttributeUpdateCallback` - Callable[[TypedAttributePath, SubscriptionTransaction], None] - `SetEventUpdateCallback` - Callable[[EventReadResult, SubscriptionTransaction], None] - await changes in the main loop using a trigger mechanism from the callback. Example for setting callbacks: ```python cb = EventSubscriptionHandler(cluster, cluster_id, event_id) urgent = 1 subscription = await dev_ctrl.ReadEvent(nodeId=1, events=[(1, event, urgent)], reportInterval=[1, 3]) subscription.SetEventUpdateCallback(callback=cb) try: cb.get_event_from_queue(block=True, timeout=timeout) except queue.Empty: asserts.assert_fail("Timeout on event") ``` ### [WriteAttribute](../../../testing/ChipDeviceCtrlAPI.md#writeattribute) Handles concrete paths only (per spec), can handle lists. Returns list of PyChipError - Instantiate the `ClusterAttributeDescriptor` class with the value you want to send, tuple is (endpoint, attribute) - use timedRequestTimeoutMs for timed request actions Example: ```python res = await devCtrl.WriteAttribute(nodeId=0, attributes=[(0,Clusters.BasicInformation.Attributes.NodeLabel("Test"))]) asserts.assert_equal(ret[0].status, Status.Success, "write failed") ``` ### [SendCommand](../../../testing/ChipDeviceCtrlAPI.md#sendcommand) - Instantiate the command object with the values you need to populate - If there is a non-status return, it’s returned from the command - If there is a pure status return it will return nothing - Raises InteractionModelError on failure Example: ```python pai = await dev_ctrl.SendCommand(nodeid, 0, Clusters.OperationalCredentials.Commands.CertificateChainRequest(2)) ``` ## MatterBaseTest helpers - Because we tend to do a lot of single read / single commands in tests, we added a couple of helpers in MatterBaseTest that use some of the default values - `read_single_attribute_check_success()` - `read_single_attribute_expect_error()` - `send_single_cmd()` - `step()` method to mark step progress for the test harness - `skip()` / `skip_step()` / `skip_remaining_steps()` methods for test harness integration - `check_pics()` / `pics_guard()` to handle pics ## Mobly helpers The test system is based on Mobly, and the [matter_testing.py](https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/matter_testing_infrastructure/matter/testing/matter_testing.py) class provides some helpers for Mobly integration. - `default_matter_test_main` - Sets up commissioning and finds all tests, parses command-line arguments use as: ```python if __name__ == "__main__": default_matter_test_main() ``` - Mobly will run all methods starting with `test_` prefix by default - use `--tests` command line argument to specify exact name,s - Setup and teardown methods - `setup_class` / `teardown_class` - `setup_test` / `teardown_test` - Don’t forget to call the `super()` if you override these ## Test harness helpers The python testing system also includes several methods for integrations with the test harness. To integrate with the test harness, you can define the following methods on your class to allow the test harness UI to properly work through your tests. All of these methods are demonstrated in the [hello_example.py](https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/hello_test.py) reference. - Steps enumeration: - Define a method called `steps_` to allow the test harness to display the steps - Use the `self.step()` method to walk through the steps - Test description: - Define a method called `desc_` to send back a string with the test description - Top-level PICS: - To guard your test on a top level PICS, define a method called `pics_` to send back a list of PICS. If this method is omitted, the test will be run for every endpoint on every device. - Overriding the default timeout: - If the test is exceptionally long running, define a property getter method `default_timeout` to adjust the timeout. The default is 90 seconds. Deferred failures: For some tests, it makes sense to perform the entire test before failing and collect all the errors so the developers can address all the failures without needing to re-run the test multiple times. For example, tests that look at every attribute on the cluster and perform independent operations on them etc. For such tests, use the ProblemNotice format and the convenience methods: - `self.record_error` - `self.record_warning` These methods keep track of the problems, and will print them at the end of the test. The test will not be failed until an assert is called. A good example of this type of test can be found in the device basic composition tests, where all the test steps are independent and performed on a single read. See [Device Basic Composition tests](https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/TC_DeviceBasicComposition.py) ## Command line arguments - Use `--help` to get a full list - `--storage-path` - Used to set a local storage file path for persisted data to avoid clashing files. It is suggested to always provide this argument. Default value is `admin_storage.json` in current directory. - `--commissioning-method` - Need to re-commission to python controller as chip-tool and python commissioner do not share a credentials - `--discriminator`, `--passcode`, `--qr-code`, `--manual-code` - `--tests` to select tests - `--PICS` - `--int-arg`, `--bool-arg`, `--float-arg`, `--string-arg`, `--json-arg`, `--hex-arg` - Specify as key:value ex --bool-arg pixit_name:False - Used for custom arguments to scripts (PIXITs) ## PICS and PIXITS - PICS - use --PICS on the command line to specify the PICS file - use check_pics to gate steps in a file - have_whatever = check_pics(“PICS.S.WHATEVER”) - PIXITs - use --int-arg, --bool-arg etc on the command line to specify PIXITs - Warn users if they don’t set required values, add instructions in the comments - pixit_value = self.user_params.get("pixit_name", default) ## Support functionality To create a controller on a new fabric: ```python new_CA = self.certificate_authority_manager.NewCertificateAuthority() new_fabric_admin = new_certificate_authority.NewFabricAdmin(vendorId=0xFFF1, fabricId=self.matter_test_config.fabric_id + 1) TH2 = new_fabric_admin.NewController(nodeId=112233) ``` Open a commissioning window (ECW): ```python params = self.OpenCommissioningWindow(dev_ctrl=self.default_controller, node_id=self.dut_node_id) ``` To create a new controller on the SAME fabric, allocate a new controller from the fabric admin. Fabric admin for default controller: ```python fa = self.certificate_authority_manager.activeCaList[0].adminList[0] second_ctrl = fa.new_fabric_admin.NewController(nodeId=node_id) ``` Reboot the DUT during testing: ```python # Simple reboot - device state persists await self.request_device_reboot() # Factory reset - clears device state (removes KVS) await self.request_device_factory_reset() ``` ```shell # Example Command w/ run_python_test.py test runner: scripts/tests/run_python_test.py --factory-reset --app out/linux-x64-all-clusters/chip-all-clusters-app --app-args "--discriminator 1234 --KVS kvs1" --script-args "--storage-path admin_storage.json --commissioning-method on-network --discriminator 1234 --passcode 20202021 --PICS src/app/tests/suites/certification/ci-pics-values --endpoint 1" --script src/python_testing/TC_ACL_2_10.py --app-ready-pattern "APP STATUS: Starting event loop" ``` The `request_device_reboot()` and `request_device_factory_reset()` methods work differently depending on the environment. When the test is started with `run_python_test.py` as it is in the CI, need to make sure to import MatterBaseTest and have your test module inherit from it to make this functionality accessible during your test, the device is automatically rebooted and possibly factory reset during the test depending on test implementation using the restart_flag_file. When the test is started by some other means (e.g., during certification testing), you'll be prompted to manually reboot or factory reset the device using the device-specific mechanism. If reboot utilized automatically expires existing controller sessions to device to force reconnection once device is back up and stable or if factory reset utilized the device will automatically re-enter commissioning mode to allow new commissioning once the device is back up and stable. See [TC-ACL-2.10](https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/TC_ACL_2_10.py) for an example testing ACL persistence across reboots. ## Automating manual steps Some test plans have manual steps that require the tester to manually change the state of the DUT. To run these tests in a CI environment, specific example apps can be built such that these manual steps can be achieved by Matter or named-pipe commands. In the case that all the manual steps in a test script can be achieved just using Matter commands, you can check if the `PICS_SDK_CI_ONLY` PICS is set to decide if the test script should send the required Matter commands to perform the manual step. ```python self.is_ci = self.check_pics("PICS_SDK_CI_ONLY") ``` In the case that a test script requires the use of named-pipe commands to achieve the manual steps, you can use the method `write_to_app_pipe(command,app_pipe)` to send these commands. This method requires value for `app_pipe`, if is not provided in the method it will use argument from the CMD or CI argument `--app-pipe` which must contain the string value with path of the pipe. This value depends on how the --app-pipe in the app is set up. Note: The name of the pipe can be anything while is a valid file path. Example of usage: ```shell # First run the app with the desired app-pipe path: ./out/darwin-arm64-all-clusters/chip-all-clusters-app --app-pipe /tmp/ref_alm_2_2 # Then execute the test with the app-pipe argument with the value defined while running the app. python3 src/python_testing/TC_REFALM_2_2.py --commissioning-method on-network --qr-code MT:-24J0AFN00KA0648G00 --PICS src/app/tests/suites/certification/ci-pics-values --app-pipe /tmp/ref_alm_2_2 --int-arg PIXIT.REFALM.AlarmThreshold:1 ``` ### Running on a separate machines If the DUT and test script are running on different machines, the `write_to_app_pipe` method can send named-pipe commands to the DUT via ssh. This requires two additional environment variables: - `LINUX_DUT_IP` sets the DUT's IP address - `LINUX_DUT_UNAME` sets the DUT's ssh username. If not set, this is assumed to be `root`. The `write_to_app_pipe` also requires that ssh-keys are set up to access the DUT from the machine running the test script without a password. You can follow these steps to set this up: 1. If you do not have a key, create one using `ssh-keygen`. 2. Authorize this key on the remote host: run `ssh-copy-id user@ip` once, using your password. 3. From now on `ssh user@ip` will no longer ask for your password. ## Other support utilities - `basic_composition` - wildcard read, whole device analysis - `CommissioningFlowBlocks` - various commissioning support for core tests - `spec_parsing` - parsing data model XML into python readable format # Running tests locally ## Setup The scripts require the python wheel to be compiled and installed before running. To compile and install the wheel, do the following: First activate the matter environment using either ```shell . ./scripts/bootstrap.sh ``` or ```shell . ./scripts/activate.sh ``` bootstrap.sh should be used for for the first setup, activate.sh may be used for subsequent setups as it is faster. Next build the python wheels and create / activate a venv ```shell ./scripts/build_python.sh -i out/python_env source out/python_env/bin/activate ``` ## Running tests - Note that devices must be commissioned by the python test harness to run tests. chip-tool and the python test harness DO NOT share a fabric. Once the wheel is installed, you can run the python script as a normal python file for local testing against an already-running DUT. This can be an example app on the host computer (running in a different terminal), or a separate device that will be commissioned either over BLE or WiFi. For example, to run the TC-ACE-1.2 tests against an un-commissioned DUT: ```shell python3 src/python_testing/TC_ACE_1_2.py --commissioning-method on-network --qr-code MT:-24J0AFN00KA0648G00 ``` Some tests require additional arguments (ex. PIXITs or configuration variables for the CI). These arguments can be passed as sets of key/value pairs using the `---arg:` command line arguments. For example: ```shell --int-arg PIXIT.ACE.APPENDPOINT:1 --int-arg PIXIT.ACE.APPDEVTYPEID:0x0100 --string-arg PIXIT.ACE.APPCLUSTER:OnOff --string-arg PIXIT.ACE.APPATTRIBUTE:OnOff ``` ## IDM Conformance tests The conformance tests are whole-node tests that ensure the device under test meets some of the basic interaction model, data model, and system model requirements in the specification. These tests are some of the most commonly failed tests as they often turn up real bugs on devices. The recommendation from the certification testing team is to run these tests before any other application-specific tests as failures on these tests normally result in device configuration changes that would necessitate re-test in other areas. The tests in [https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/TC_DeviceBasicComposition.py](https://github.com/project-chip/connectedhomeip/blob/master/TC_DeviceBasicComposition.py) cover the following checks: - Root node checks for commissionable devices - Base device checks for all endpoints - Base cluster checks for all clusters (checking global attribute conformance) - Basic utf-8 string format verification for string type attributes - Tag list conformance for sibling endpoints - Endpoint list verification for power source clusters - Various Descriptor cluster checks - "test" to create device description files in MatterTlvJson and text The tests in [https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/TC_DeviceConformance.py](https://github.com/project-chip/connectedhomeip/blob/master/TC_DeviceConformance.py) cover the following checks: - Cluster conformance for every cluster is correct with respect to implemented features, attributes and commands - Cluster revisions are correct for the stated specification revision - Device types implement all the required cluster and element overrides - Device type revisions are correct for the stated specification revision - Devices types respect superset rules The tests in [https://github.com/project-chip/connectedhomeip/blob/master/src/python_testing/TC_DefaultWarnings.py](https://github.com/project-chip/connectedhomeip/blob/master/TC_DefaultWarnings.py) cover the following checks: - Checks for common unintentional default values in clusters that may have been missed when implementing devices from the SDK ### Running Conformance Tests There are a number of options for running conformance tests. Conformance tests can be run on devices that have been commissioned into the test framework fabric, similar to other certification tests. Because conformance tests operate entirely on a single wildcard read of the device attributes, they can be run over PASE on an uncommissioned device, or run against a device that has been commissioned into the test fabric. They can also be run against a MatterTlvJson file with a representation of this information. These files can be generated from the TC_DeviceBasicComposition.py tests, as described below. To run any of the python certification tests, you will first need to set up your environment as described in [Setup](#setup). #### Running conformance tests against an uncommissioned device over PASE First ensure the device is in commissioning mode. Then run the test against the device by supplying either the QR code, the manual pairing code or the discriminator / password pair. ```shell python3 TC_DeviceConformance.py --qr-code MT:-24J0AFN00KA0648G00 ``` ```shell python3 TC_DeviceConformance.py --manual-code 34970112332 ``` ```shell python3 TC_DeviceConformance.py --discriminator 3840 --passcode 20202021 ``` #### Running conformance tests against a commissioned device over CASE If the device has already been commissioned into the python testing fabric, you can run the test directly ```shell python3 TC_DeviceConformance.py ``` This uses the default fabric storage and node ID. These can also be specified when running the tests. You can commission the device into the test fabric before running the test by using the `--commissioning-method` flag and the `--qr-code`, `--manual-code` or `--discriminator` and `--passcode` flags. For example: ```shell python3 TC_DeviceConformance.py --discriminator 3840 --passcode 20202021 --commissioning-method on-network ``` You may also need to provide parameters for the commissioning method. If the commissioning-method is `ble-thread`, you will also need to provide the thread operational dataset via the `--thread-dataset-hex` parameter. If the commissioning method is `ble-wifi`, you will also need to provide the wifi SSID and password via the `--wifi-ssid` and `--wifi-passphrase` parameters. By default, the test stores fabric information in `admin_storage.json` in the current directory and uses a node ID of `0x12344321` for the device being tested. You can supply these directly by using the `--storage-path` and `--dut-node-id` flags. #### Running conformance tests against MatterTlvJson files Because the conformance tests are run against the attribute wildcard read from the device, they can also be run against a MatterTlvJson machine readable file without requiring the device to be physically present. To run against a previously generated MatterTlvJson device dump file: ```shell python3 TC_DeviceConformance.py --string-arg test_from_file:device_dump_0xFFF1_0x8001_1.json ``` You can generate a MatterTlvJson file for a device by leveraging the certification test that generates these (TC-IDM-12.1, implemented in TC_DeviceBasicComposition.py). ```shell python3 TC_DeviceBasicComposition.py --qr-code MT:-24J0AFN00KA0648G00 --tests test_TC_IDM_12_1 ``` ## Local host app testing `./scripts/tests/run_python_test.py` is a convenient script that starts an example DUT on the host and includes factory reset support ```shell ./scripts/tests/run_python_test.py --factory-reset --app --app-args "whatever" --script --script-args "whatever" ``` For example, to run TC-ACE-1.2 tests against the linux `chip-lighting-app`: ```shell ./scripts/tests/run_python_test.py --factory-reset --app ./out/linux-x64-light-no-ble/chip-lighting-app --app-args "--trace-to json:log" --script src/python_testing/TC_ACE_1_2.py --script-args "--commissioning-method on-network --qr-code MT:-24J0AFN00KA0648G00" ``` # Running tests in CI - Add test to the `repl_tests_linux` section of `.github/workflows/tests.yaml` - Don’t forget to set the PICS file to the ci-pics-values - If there are steps in your test that will fail on CI (e.g. test vendor checks), gate them on the PICS_SDK_CI_ONLY - ```python if not self.is_pics_sdk_ci_only: ... # Step that will fail on CI ``` The CI test runner uses a structured environment setup that can be declared using structured comments at the top of the test file. To use this structured format, use the `--load-from-env` flag with the `run_python_tests.py` runner. Ex: `scripts/run_in_python_env.sh out/venv './scripts/tests/run_python_test.py --load-from-env /tmp/test_env.yaml --script src/python_testing/TC_ICDM_2_1.py'` ## Running ALL or a subset of tests when changing application code `scripts/tests/local.py` is a wrapper that is able to build and run tests in a single command. Example to compile all prerequisites and then running all python tests: ```shell ./scripts/tests/local.py build # will compile python in out/pyenv and ALL application prerequisites ./scripts/tests/local.py python-tests # Runs all python tests that are runnable in CI ``` ## Defining the CI test arguments Arguments required to run a test can be defined in the comment block at the top of the test script. The section with the arguments should be placed between the `# === BEGIN CI TEST ARGUMENTS ===` and `# === END CI TEST ARGUMENTS ===` markers. Arguments should be structured as a valid YAML dictionary with a root key `test-runner-runs`, followed by the run identifier, and then the parameters for that run, e.g.: ```python # See https://github.com/project-chip/connectedhomeip/blob/master/docs/testing/python.md#defining-the-ci-test-arguments # for details about the block below. # # === BEGIN CI TEST ARGUMENTS === # test-runner-runs: # run1: # app: ${TYPE_OF_APP} # app-args: # script-args: # factory-reset: # quiet: # === END CI TEST ARGUMENTS === ``` ### Description of Parameters - `app`: Indicates the application to be used in the test. Different app types as needed could be referenced from section [name: Generate an argument environment file ] of the file [.github/workflows/tests.yaml](https://github.com/project-chip/connectedhomeip/blob/master/.github/workflows/tests.yaml) - Example: `${TYPE_OF_APP}` - `factory-reset`: Determines whether a factory reset should be performed before the test. - Example: `true` - `quiet`: Sets the verbosity level of the test run. When set to True, the test run will be quieter. - Example: `true` - `app-args`: Specifies the arguments to be passed to the application during the test. - Example: `--discriminator 1234 --KVS kvs1 --trace-to json:${TRACE_APP}.json` - `app-ready-pattern`: Regular expression pattern to match against the output of the application to determine when the application is ready. If this parameter is specified, the test runner will not run the test script until the pattern is found. - Example: `"Manual pairing code: \\[\\d+\\]"` - `app-stdin-pipe`: Specifies the path to the named pipe that the test runner might use to send input to the application. - Example: `/tmp/app-fifo` - `script-args`: Specifies the arguments to be passed to the test script. - Example: `--storage-path admin_storage.json --commissioning-method on-network --discriminator 1234 --passcode 20202021 --trace-to json:${TRACE_TEST_JSON}.json --trace-to perfetto:${TRACE_TEST_PERFETTO}.perfetto` This structured format ensures that all necessary configurations are clearly defined and easily understood, allowing for consistent and reliable test execution. # Test Module Guards Guards let you run test steps only when certain conditions are met (e.g., a cluster has a feature, attribute, or command). See below sections for usage examples please. ## Cluster Guards The following are inherited from the `matter_testing` module, so they do not need to be imported. For more examples on these guards, see `src/python_testing/support_modules/binfo_attributes_verification.py`. Use these to skip a test step when the endpoint or cluster does not support the feature, attribute, or command under test. ### Attribute Guard Runs the test step only if the endpoint and cluster contain the given attribute: Example: ```python self.step() if await self.attribute_guard(endpoint=self.endpoint, attribute=attributes.OperationalState): # If attribute exists then test step continues, else test step is skipped. ``` ### Feature Guard Runs the test step only if the cluster on the endpoint supports the given feature: Example: ```python self.step() if await self.feature_guard(endpoint=self.endpoint, cluster=Clusters.BooleanStateConfiguration, feature_int=Clusters.BooleanStateConfiguration.Bitmaps.Feature.kAudible): # IF feature available then do test step, else test step is skipped. ``` ### Command Guard Runs the test step only if the endpoint has the cluster that supports the given command: Example: ```python self.step() if await self.command_guard(endpoint=self.endpoint, command=commands.Resume): # If command available, then do test step here, else test step is skipped ``` ## Additional Test Guards This section covers the PICS guard and the `run_if_endpoint_matches` decorator, with an example for each. ### PICS Guard Inherited from `matter_testing` (no import needed). Runs the test step only if the given PICS key is enabled in the PICS file: Example: ```python if self.pics_guard(self.check_pics()): self.step() # Do test step logic here else: self.skip_step() #skip test step ``` ### run_if_endpoint_matches decorator Import the decorator and the check functions from `matter.testing.decorators`: ```python from matter.testing.decorators import has_feature, has_command, has_attribute, has_cluster, run_if_endpoint_matches ``` Skips the whole test if the specified endpoint does not have the required cluster, feature, attribute, or command. Apply the decorator above the test function. Examples: ```python #Feature: @run_if_endpoint_matches( has_feature(Clusters.CameraAvStreamManagement, Clusters.CameraAvStreamManagement.Bitmaps.Feature.kSnapshot) ) async def test_TC_AVSM_2_2(self): # Do test step logic if feature exists, else this test is skipped #Cluster @run_if_endpoint_matches(has_cluster(Clusters.AdministratorCommissioning)) async def test_TC_CADMIN_1_3(self): # Do test step logic if cluster exists, else this test is skipped #Attribute: @run_if_endpoint_matches(has_attribute(Clusters.AccessControl.Attributes.Extension)) async def test_TC_ACL_2_3(self): # Do test step logic if attribute exists, else this test is skipped #Command @run_if_endpoint_matches(has_command(Clusters.OperationalCredentials.Commands.SetVIDVerificationStatement)) async def test_TC_OPCREDS_3_8(self): # Do test step logic if command is available, else this test is skipped ```