Matter ASR Bridge Example#

This example demonstrates the Matter Bridge application on ASR platform.

Introduction#

A prototype application that demonstrates dynamic endpoint with device commissioning and cluster control. It adds the non-chip device as endpoints on a bridge(Matter device). In this example four light devices supporting on-off cluster have been added as endpoints

  1. Light1 at endpoint 3

  2. Light2 at endpoint 4

  3. Light3 at endpoint 5

  4. Light4 at endpoint 6

Building and Commissioning#

Please refer Building and Commissioning guides to get started

./scripts/build/build_examples.py --target asr-$ASR_BOARD-bridge build

Testing the example#

  • An additional light-switch device is required to complete this example.

  • Commission bridge device with node-id 1

  • Commission light-switch device with node-id 2

  • After bridge device and light-switch device successful commissioning, use the GUI tool DOGO to input AT command subdevice sync for the bridge device, and then use chip-tool to write ACL to the bridge device.

    ./chip-tool accesscontrol write acl '[{"fabricIndex": 1, "privilege": 5, "authMode": 2, "subjects": [112233], "targets": null },{"fabricIndex": 1, "privilege": 3, "authMode": 2, "subjects": [2], "targets": null }]' 1 0

  • After successful commissioning, use the chip-tool for binding light-switch’s endpoint 1 with bridge device’s endpoint 3 respectively.

    ./chip-tool binding write binding '[{"fabricIndex": 1, "node":1, "endpoint":3, "cluster":6}]' 2 1

  • Light switch button

    This demo uses button to test changing the Light1, and the bridge device will output log information:

    Name

    Pin

    BUTTON

    PAD12