Compiling, Running, and Controlling Matter examples#

The SDK provides a number of example devices and controllers that can be used to familiarize yourself with the SDK and the Matter ecosystem.

Example Devices#

The example devices (occasionally referred to as “apps”) are located in the examples directory. The examples often implement one particular device type. Some have implementations for various platforms.

The linux platform examples are provided as examples, and are used in the CI. These can be used for preliminary testing.

The all-clusters-app is used by the QA team for testing. This app implements nearly all the available clusters and does not conform to a specific device type. This app is not a good starting place for product development.

Example Controllers#

The SDK has two example controllers that can be used to interact with devices for testing.

chip-tool is a C++ command line controller with an interactive shell. More information on chip-tool can be found in the chip-tool guide.

chip-repl is a shell for the python controller. The chip-repl is part of the python controller framework, often used for testing. More information about the python controller can be found in the python testing documentation.

Building your first demo app (lighting)#

The examples directory contains a set of apps using an example device composition .zap file. For more information about device composition and zap, see ZAP documentation.

This quick start guide will walk you through

  • Building an app (lighting app) for the host platform

  • Interacting with the app using chip-tool (controller)

Building the lighting app#

  • Install prerequisites from docs/guides/BUILDING.md

  • Run bootstrap or activate to install all the required tools etc.

    • . scripts/bootstrap.sh - run this first, or if builds fail

    • . scripts/activate.sh - faster, use if you’ve already bootstrapped and are just starting a new terminal

The build system we use is Ninja / GN. You can use a standard gn gen / ninja to build as normal, or use the scripts to build specific variants. More information about the build system can be found at BUILDING.md. The official quickstart guide for the build system is located ag https://gn.googlesource.com/gn/+/master/docs/quick_start.md and a full reference can be found at https://gn.googlesource.com/gn/+/main/docs/reference.md.

To build with the scripts, use scripts/build/build_examples.py - scripts/build/build_examples.py targets - scripts/build/build_examples.py --target <your target> build - builds to out/<target_name>/

Scripts can be used to build both the lighting app and chip tool

  • Lighting app (device)

    • ./scripts/build/build_examples.py --target linux-x64-light-no-ble build

    • This will build an executable to ./out/linux-x64-light-no-ble/chip-lighting-app

  • NOTE that the host name (linux-x64 here) may be different on different systems ex. darwin

  • chip-tool (controller)

    • ./scripts/build/build_examples.py --target linux-x64-chip-tool build

    • This will build an executable to ./out/linux-x64-chip-tool/chip-tool

Building / Interacting with Matter Examples#

The first thing you need to do is to commission the device. First start up the lighting app in one terminal. By default it will start up with the default discriminator (3840) and passcode (20202021) and save its non-volatile information in a key-value-store file (“KVS”) in /tmp/chip_kvs. You can change this, and multiple other options on the command line. For a full description, use the --help command.

Start the lighting app in one terminal using

./out/linux-x64-light-no-ble/chip-lighting-app

The lighting app will print out all its setup information. You can get the setup codes, discriminator and passcode from the logs.

Open a new terminal to use chip tool. Commission the device using:

./out/linux-x64-chip-tool/chip-tool pairing code 0x12344321 MT:-24J0AFN00KA0648G00

NOTE: pairing is the old name for commissioning. 0x12344321 is the node ID you want to assign to the node. 0x12344321 is the default for testing. MT:-24J0AFN00KA0648G00 is the QR code for a device with the default discriminator and passcode. If you have changed these, the code will be different.

Basic device interactions - Sending a command#

./out/linux-x64-chip-tool/chip-tool onoff on 0x12344321 1

where:

  • onoff is the cluster name

  • on is the command name

  • 0x12344321 is the node ID you used for commissioning

  • 1 is the endpoint

Basic device interactions - Reading an attribute#

./out/linux-x64-chip-tool/chip-tool onoff read on-off 0x12344321 1

where:

  • onoff is the cluster name

  • read is the desired action

  • on-off is the attribute name

  • 0x12344321 is the node ID you used for commissioning

  • 1 is the endpoint